Blog

In a plunger pump, the total stroke L of the plunger's reciprocating motion is constant and determined by the cam's lift. The amount of fuel supplied

Piston pumps are classified into two representative structural forms: axial piston pumps and radial piston pumps.

A piston pump is a crucial component of a hydraulic system. It relies on the reciprocating motion of a piston within a cylinder to change the volume o

NBR is produced by emulsion polymerization of butadiene and acrylonitrile. It is mainly produced using low-temperature emulsion polymerization and has

A solenoid valve is an electromagnetically controlled industrial device, a fundamental component of automation systems used to control fluids. It belo

As a key component in hydraulic cylinders, mining single-prop supports, hydraulic supports, and gun barrels, the quality of the cylinder's machining d

A single-piston hydraulic cylinder has a piston rod at only one end. Figure 1 shows a single-piston hydraulic cylinder. Its inlet and outlet ports A a

A hydraulic cylinder is a hydraulic actuator that converts hydraulic energy into mechanical energy, performing linear reciprocating motion (or oscilla

Hydraulic power units are widely used in equipment such as car lifts, scissor lifts, loading ramps, and snowplows, and customized services are also av

A hydraulic power unit, also known as an oil supply device, is the core power source equipment of an industrial hydraulic control system. It consists

Due to the pressure of the hydraulic oil, the unbalanced force causes torque to be generated in the rotor. The output torque of a vane type hydraulic

From an energy conversion perspective, hydraulic pumps and hydraulic motors are reversible hydraulic components. Inputting working fluid into any type