Blog

Both are swashplate axial piston variable pumps for open circuits, both trace back to the same Rexroth design lineage, and both are widely second-sour

When a pump fails or a spare is due, the choice between an original and an aftermarket hydraulic pump is rarely about which one is "better"

A Bosch Rexroth A6VM model code describes how one motor was configured when it left the factory: size, control device, shaft, flange, port plate, valv

An A2FM model code identifies one specific configuration of a Bosch Rexroth bent-axis fixed displacement motor. It records the size, series, drive sha

If you are holding a pump with A11VO60DRS/10R-NSC12N00 or something similar stamped on the nameplate, you are not choosing a pump. You are verifying o

An A4VG model code describes a pump configuration. To read it, first identify the series and the applicable regional data sheet, then match each code

An A4VSO model code describes a pump's configuration. It helps you identify displacement, control, rotation and mechanical interfaces before requestin

When the rotor of a vane pump rotates, the tips of the vanes, under the action of centrifugal force and pressurized oil, press tightly against the inn

If the wear on the pump cover's working surface is minor, it can be removed by hand grinding. Place a small amount of valve abrasive on a platform or

Composed of components including an aluminum alloy front cover, intermediate body, and rear cover; alloy steel gears; and an aluminum alloy pressure p

For piston pumps supplied with oil by a make-up pump, operators should inspect the pump 1-2 times daily after 3000 hours of use, checking for normal o

Check the plunger assembly fit. Insert the plunger end into the plunger sleeve at approximately 60°. If the plunger slides down slowly under its own w